INTERCEPTOR SALIE XL 1:10 2S-3000 mAh radio-controlled electric car electric-rc car

Whatever its version, the Interceptor is always equipped with the same Brushless motorization allowing it to accelerate sharply and have a high top speed.

The differences between the versions offered are based on the choice of bodies and the battery and charger equipment.

This version equipped with a 2S (7.4 Volt) 3000 LiPo battery mAh with its protective shell and its PROTRONIK charger is intended for young beginners to allow them to easily master the powerful Brushless motor in the first stages of use.

They will then be able to equip the car with a new 3S battery (3 cells, 11.1 volts) to have more power and fully use the capabilities of the Brushless motor.

THE INTERCEPTOR V8 1/10 XL is inspired by a legendary car from a famous trilogy from the years 1979-2015 where the action takes place in a violent society where crime is on the rise and chaos is spreading.

Available in 2 different colors, this new 1/10 XL chassis thanks to its independent suspensions and its large ground clearance will allow you to have fun on all types of terrain including grass, bitumen, earth.

Equipped with a 2500 KV Brushless motor, a HobbyWing 50A variator and the brand new MHD4C 4-way radio control, it has all the assets to fully satisfy young and old, and ace sensations at the wheel of a 1/10 car of impressive XL size (600 mm in length).

The body has a roof on its roof LED ramp for driving at night, an imposing functional spare wheel and a replica of the compressor on its front hood with the most beautiful effect, giving it an aggressive look.

The bodywork in the dirty, dusty version is produced in a Limited Edition (reference Z6000027S).

Main equipment and characteristics:
4-wheel drive car
99% Ready to roll
New highly reliable 4-way MHD4C radio control
2500KV Brushless motor and 50A Brushless variator from HOBBYWING brand
6 Kgs servo waterproof to splashes water for steering
Central transmission cardan in anodized aluminum
Front and rear suspension reinforcements in anodized aluminum
Protection of crown and motor pinion against dust
Protection against central gimbal dust with adjustment slipper
Important ground clearance of 7 cm
Resistant composite molded chassis with aluminum front and rear plates
Large Very resistant front and rear bumpers
Metal differential gears
Front toe and rear camber adjustable by rods
Hydraulic shock absorbers with oil
Completely on bearings
Receiver box waterproof against splashing water
Arm front suspension on ball joints
Roof ramp with LEDs.

Elements included:

The motor can run with a 2-cell LiPo battery (7.4 volts) for beginners or with a 3-cell LiPo battery (11.1 volts) for experienced pilots who will be able to control the power of the motor.

These equipment/accessories are now included from September 2023 at no extra cost.

The equipment varies according to the Interceptor references.

By ordering this reference you choose:
- Bodywork soiled,
- A 2S 3000 mAh (7.4 volt) propulsion battery with its protective cover,
- A battery charger PROTRONIK brand, reference 0397723.

The advantage of this charger is that it can be used at home on 220 Volts, but also in the field with the 12 Volts of a car battery.

It is now possible with this Interceptor to relive on asphalt (or other surfaces) the adventures of your favorite hero from 1979-1985!

Length: 600 mm
Width: 300 mm
Height: 205 mm
Weight: 2700 g
Wheelbase: 328 mm
Tire diameter: ø 110 mm
Wheel diameter: ø 58 mm
Ground clearance: 55 mm