Ship model Primer Boat RTS Gray / Black
JOYSWAY has put all its experience in the research and development of radio controlled boats to offer this new boat Starter carp fishermen.
Its main features are described below.
The tests were carried out with 500g of primers.
1) Forward speed in a straight line: 3km / h (0.83m / s)
2) Turning radius (right and left): 1.5m (note: the direction is provided by the speed differential between the two propellers)
3 ) Speed in reverse: approximately 0.15m / s
4) Autonomy at maximum continuous speed: greater than 1H (note: stopping the engines regularly the autonomy exceeds 2H)
5) Navigation lights: 2 blue lights are located at forward, 2 red lights are located at the rear.
A switch located on the receiver inside the hull.
When the switch is in the ON position, the navigation lights stay on continuously.
6) Low battery warning: When the boat's battery gets close to the minimum voltage, the navigation lights start flashing.
Tell the fisherman it's time to recharge the battery.
Note: 6.1) Once the Low Battery Alert is activated, the boat has approximately 4 minutes of battery life.
6.2) Whether the navigation lights are activated or not, they will start to flash when the battery voltage reaches the minimum voltage threshold corresponding to the activation of the alert.
7) Release hatch: Close the hatch before pouring the primers into the compartment.
The button on the transmitter controls the opening of the hatch.
One push of the button, the hatch opens fully and all the primers are released.
The hatch will remain open during the rest of the navigation.
8) Magnetic hooks: It is possible to connect 2 lines to the back of the boat, they are retained by magnetization.
The boat allows you to drop lines where you want.
Once at the desired location, simply pull on the line to detach it from the magnet and release it.
Bring the boat back to shore, close the hatch, refill it with primers, then connect a new line and drop it where you want, and so on for all your lines.
OPTION 1: Echo sounder
1) The user chooses the echo sounder himself, we do not market this accessory.
2) The initiating boat is equipped at the rear with a fixing compatible with the great majority of the echo sounders of the market: that it is fixed by means of a pliers or by screwing.
3) At the rear of the boat, you can unscrew the 6 screws fixing the handle to access the hold, allowing you to place the echo sounder transmitter.
You will notice that the rear part of the boat handle allows the passage of the antenna and the sonar echo signal cable.
4) The boat's receiver has a 12V output for feeding the echo sounder without having to use an extra battery.
OPTION 2: Underwater Camera
1) This camera is produced in our factories and available as an option.
2) Elements included in the kit: 2.1) Electric winch
2.2) 4.3 "color screen (can be attached directly to the transmitter)
3) The underwater camera can be attached to the line using magnetic hooks Ideally, it should be 30cm away from the hook so that the fisherman can see the fish that is biting.
This brings an extra dimension to the fishery.
4) The cable section of the camera is 1.2mm, the length is 5m and its tensile strength is 15kg.
The camera is used at a maximum depth of 6m.
5) The camera winch drum measures 60mm in diameter, it incorporates a video transmitter and a slot for 2 AA batteries for power supply.
The winch is waterproof.
6) The winch is easily installed on the deck at the rear of the hull.
(In the same way as the echo sounder)
7) The winch is controlled directly from the boat 's transmitter.
8) On the transmitter, the winch control potentiometer is graduated to easily control the camera's diving depth.
The boat "Bait Boat 500" is available in 2 colors, yellow and black or gray and black.
Radio-controlled model
Beginner level
Length 556 mm
Width 240 mm
Weight 1650 g
Type 4-way radio with steering wheel
Paint and glue : To be bought separately
The tools, paints and glue are not provided.
You can see our selection with the
essential glues and paints or
the full range..
To learn more about size and scale,
click here.
Reference : 023151G
Other tags : Z023151G - Z23151G - 23151G
RC boat/Accessoires de pêche - to be assembled and painted - Paint and glue to be bought separately
